OEM Manufacturer Lightweight Folding Wheelchair - Two function hospital bed double cranks hospital bed – Webian
OEM Manufacturer Lightweight Folding Wheelchair - Two function hospital bed double cranks hospital bed – Webian Detail:
|
Headboard/Footboard |
Detachable ABS bed headboard |
|
Gardrails |
Aluminum alloy and stainless steel guardrail |
|
Bed surface |
High quality large steel plate punching bed frame L1950mm x W900mm |
|
Brake system |
125mm silent with brake casters, |
|
Back lifting angle |
0-75° |
|
Leg lifting angle |
0-45° |
|
Max load weight |
≤250kgs |
|
Full Length |
2090mm |
|
Full width |
960mm |
|
Options |
Mattress, IV pole, Drainage bag hook, dinning table |
|
HS CODE |
940290 |
1. Bed Headboard
2. Bed Footboard
3. Bed-frame
4. Back panel
5. Welded bed panel
6. Leg panel
7. Foot panel
8. Crank for back lifting
9. Crank for leg lifting
10. Cranking mechanism
11. Toilet hole
12. Crank for toilet hole
13. Guardrails
14. Casters
It is suitable for patient nursing and recuperation.
1. Bed headboard and footboard
Insert the fixed screw of bed frame into the groove of headboard and footboard (as shown in figure 1).
2. IV stand: insert the IV stand in the reserved hole.
3. ABS dinning table: Put the table on the guardrails and clamp it tightly.
Aluminum or stainless steel guardrails:Fixed the guardrail with screws through the holes of guardrail and bed frame.
1. Back rest lifting: Turn the crank clockwise, the back panel lift
Turn the crank counterclockwise, the back panel down.
2. Leg rest lifting: Turn the crank clockwise, the leg panel lift
Turn the crank counterclockwise, the leg panel down.
3. Toilet hole: Pull out the plug, the toilet hole is opened; push the toilet door, then insert the plug, the toilet hole is closed.
Toilet hole with crank device, turn the crank clockwise to open the toilet hole, turn the crank counterclockwise to close the toilet hole
1. Check that the headboard and footboard were fasten tightly with bed frame.
2. The safe working load is 120kg, the max load weight is 250kgs.
3. After installing the hospital bed, place it on the ground and check whether the bed body shakes.
4. The drive link should be lubricated regularly.
5. Check the casters regularly. If they are not tight, please fasten them again.
The packaged products can be transported by general ways of transport. During the transportation, please pay attention to preventing sunshine, rain and snow. Avoid transportation with toxic, harmful or corrosive substances.
Packaged products should be placed in a dry, well-ventilated room without corrosive materials or heat source.
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict good quality manage, reasonable rate, superior assistance and close co-operation with shoppers, we have been devoted to supplying the very best price for our consumers for OEM Manufacturer Lightweight Folding Wheelchair - Two function hospital bed double cranks hospital bed – Webian , The product will supply to all over the world, such as: USA, Washington, Angola, We have 48 provincial agencies in the country. We also have stable cooperation with several international trading companies. They place order with us and export products to other countries. We expect to cooperate with you to develop a larger market.
By Hilda from Dominica - 2018.08.12 12:27
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Delia from Bangalore - 2017.06.29 18:55
