For manufacturers, the content of the inspection standards for medical electric hospital beds is very important, because the relevant national departments have formulated very strict inspection standards. So as the electric hospital bed industry, we must first understand the important testing standards of the country for electric hospital beds. And in strict accordance with national standards.
1. The purchase of raw materials. The counterparty must be required to have a complete set of relevant documents. For materials such as ABS, the use of recycled and reprocessed ABS materials is not recommended. And require manufacturers to have a well-documented purchase of raw materials.
2. The size of the electric hospital bed. As manufacturers of electric medical beds, their grasp of the size of electric hospital beds mainly follows the relevant data from the national population survey published every few years. For example, what is the average weight and height per capita? The above-mentioned relevant data makes more adjustments to the length and width of medical beds. Coupled with the high load capacity of the hospital beds produced by our company, all parts can be adjusted and stretched to meet the needs of most patients.
3. Related process issues in the production of electric hospital beds. According to relevant regulations, the electric hospital bed steel pipe must undergo a strict rust removal process, because if this process is not strictly operated, it will seriously reduce the service life of the electric hospital bed.
4. The spraying work of the electric hospital bed: According to relevant regulations, the electric hospital bed must be sprayed three times. This is to ensure that the spraying surface can be firmly attached to the surface of the electric medical bed and will not fall off in a short time. Most of the metal parts of the company’s operating lamps, hospital beds, operating beds use electrostatic spraying and plating processes, which are bright and tidy in appearance.
Whether it is stainless steel or ABS full plastic, it must meet the national standards in thickness and hardness. The main reason why many small manufacturers’ products fail the test is that their production technology cannot achieve the required results of the test. For example, as steel, steel plates and steel pipes with a thickness of 12mm should be used. If the thickness of the material cannot meet this standard, it will be difficult to guarantee the quality requirements of the finished product, especially after it is put into use, there will be many problems, which will cause many after-sales problems and a decline in customer experience.
Post time: Dec-31-2021